Cisco Exploration CCNA 4.0

Cisco Packet Tracer 5.3.2

2011-04-22T20:40:00.000-07:00

Cisco Packet Tracer Software Downloads Packet Tracer Version 5.3 2 Software Downloads Packet Tracer version 5.3.2 is a maintenance release that fixes functional and technical issues in the previous versions. It replaces Packet Tracer version 5.3.1 Packet Tracer 5.3 2 supports activities authored in Packet Tracer 4.0, 4.1, 4.11, 5.0, 5.1, 5.2.x , and 5.3.x Please note that the last two

CCNA3 FINAL - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0)

2010-11-02T10:04:00.001-07:00

Take Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0) November 02, 2010 1 Refer to the exhibit. An administrator documented the output of a CAM table from an Ethernet switch as shown. What action will the switch take when it receives the frame shown at the bottom of the exhibit? discard the frame forward the frame out port 2

CCNA Exploration v4 - Accessing the WAN - Exam Final Practice - Grade 100%

2010-10-28T08:37:00.000-07:00

CCNA Exploration v4 - Accessing the WAN - Exam Final Practice - Grade 100% Images comming soon! 1 A company is looking for a WAN solution to connect its headquarters site with four remote sites. What advantage would dedicated leased lines provide to the customer compared to a shared Frame Relay solution? lower cost lower latency and jitter variable bandwidth capacity fewer physical router

CCNA3 Final - 04 March 2010

2010-03-07T02:31:00.000-08:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org www.ccna4u.org CCNA3 Final - 04 March 2010 (Thanks dip see) Welcome and get lastest CCNA Exploration 4.0 Questions and answers Email: quocvuong.it@gmail.com Website: www.ccna4u.org www.ccna4u.net www.ccna4u.info 1 Which value determines if a switch becomes the central point of reference in the spanning tree topology? lowest bridge ID

CCNA2 - Final (E)

2009-07-21T21:10:00.000-07:00

DOWNLOAD1Which routing protocol maintains a topology table separate from the routing table?IGRPRIPv1RIPv2*EIGRP2Refer to the exhibit. All routers are running RIPv1. The two networks 10.1.1.0/29 and 10.1.1.16/29 are unable to access eachother. What can be the cause of this problem?Because RIPv1 is a classless protocol, it does not support this access.*RIPv1 does not support discontiguous

CCNA1 Final – v1(Lastest in Jun 2009)

2009-07-16T02:51:00.001-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info This is CCNA1 Final lastestIf you have questions please comment in this blog (Questions by Mr Nguyen Answers by quocvuong) – I hope this test 100% correct Thank you very much DOWNLOAD Note: (I will upload v2 in this blog. wait me 1 day) – In version 2 have many new questions

CCNA2 Final (Jun 2009) – 76 % – Thanks Dinidu Nadun

2009-07-16T02:48:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info DOWNLOAD NOW Sorry! I am too busy… i will update answer when i freetime….

CCNA4 Skill (Full Questions and answers) + CCNA 1-2-3-4 FINAL (Lastest)

2009-07-16T02:46:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.infoCCNA4 Skill (Full Questions and answers): Download CCNA 1-2-3-4 FINAL (Lastest): DownloadFollow this blog and get lastest versions. If you have questions or CCNA lastest please send to email: quocvuong.it@gmail.com thank you

CCNA 2 – Final 94,8% – New

2009-07-16T02:44:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info1. Refer to the exhibit. All routers are running the same routing protocol. Based on the exhibit and its displayed commands, which statement is true?ans:The link to the ISP is not advertised by the routing protocol process.2. Refer to the exhibit. While trying to diagnose a routing problem in the network, the network

CCNA1 Final v1(Lastest in Jun 2009)

2009-07-09T17:09:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info2.Which three IPv4 addresses represent valid network addresses for a subnet? (Choose three.)(true answer)=>192.168.9.64/28192.168.9.146/28(true answer)=>192.168.9.96/28192.168.9.129/26192.168.9.51/26(true answer)=>192.168.9.64/263Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)(true answer

CCNA 2 FINAL (New New New)

2009-07-09T17:06:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info1. Refer to the exhibit. The output of the show ip route command for three routers on a network is displayed. All routers are operational, pings are not blocked on this network, and no default routes are installed. Which two pings will fail? (Choose two.)from R1 to 172.16.1.1** from R1 to 192.168.3.1from R2 to 192.168.1.1from R2

CCNA 2 – Final 94,8% – New

2009-07-09T17:04:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info1. Refer to the exhibit. All routers are running the same routing protocol. Based on the exhibit and its displayed commands, which statement is true?-The link to the ISP is not advertised by the routing protocol process.2. Refer to the exhibit. While trying to diagnose a routing problem in the network, the network administrator

CCNA 1 Final Exam 640 - 802

2009-06-19T06:42:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.infoThis Test is 85% Correct1. A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?--> Use the ping 127.0.0.1 command at the command prompt.2. Refer to the

CCNA 3 Final latest (90%)

2009-06-16T00:28:00.000-07:00

http://ccna-keys.blogspot.comTke Assessment - ESwitching Final Exam - CCNA Exploration: LAN Switching and Wireless (Version 4.0) var transliterate = new Array(); transliterate[0] = "0"; transliterate[1] = "1"; transliterate[2] = "2"; transliterate[3] = "3"; transliterate[4] = "4"; transliterate[5] = "5"; transliterate[6

CCNA v4 - E4 - Module 8 (100%)

2009-05-19T11:48:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info1. Excessive broadcasts are generally a symptom of a problem at which layer?data link2. Refer to the exhibit. Users at Branch B are reporting trouble accessing a corporate website running on a server that is located at HQ. HQ and Branch A users can access the website. R3 is able to ping 10.10.10.1 successfully but not 10.10.10.2.

CCNA v4 - E3 - Module 6 (100%)

2009-05-18T05:44:00.000-07:00

www.ccna4u.net || www.ccna4u.info || www.ccna4u.org || www.9tut.info1. Refer to the exhibit. What two conclusions can be drawn from the output that is shown? (Choose two.)Both of the directly connected routes that are shown will share the same physical interface of the router. Inter-VLAN routing between hosts on the 172.17.10.0/24 and 172.17.30.0/24 networks is successful on this network.2. A

CCNA v4 - E3 - Module 5 (100%)

2009-05-14T10:29:00.000-07:00

http://www.ccna4u.net1. What three link types have been defined for Rapid Spanning-Tree Protocol? (Choose three.)shared edge-type point-to-point2. What Rapid Spanning Tree Protocol (RSTP) role is assigned to the forwarding port elected for every switched Ethernet LAN segment?designated3. How can a network administrator influence which STP switch becomes the root bridge?Set the switch priority to

CCNA v4 - E3 - Module 4 (100%)

2009-05-10T08:28:00.000-07:00

http://www.ccna4u.net1. Which statement is true when VTP is configured on a switched network that incorporates VLANs? VTP dynamically communicates VLAN changes to all switches in the same VTP domain.2. What are two features of VTP client mode operation? (Choose two.) unable to add VLANs can forward VLAN information to other switches in the same VTP domain3. Which three VTP parameters must be

CCNA v4 - E3 - Module 3 (100%)

2009-05-08T10:17:00.000-07:00

http://www.ccna4u.net1. What switch port modes will allow a switch to successfully form a trunking link if the neighboring switch port is in "dynamic desirable" mode? on, auto, or dynamic desirable mode2. Refer to the exhibit. Computer 1 sends a frame to computer 4. On which links along the path between computer 1 and computer 4 will a VLAN ID tag be included with the frame? C, E3. Refer to the

CCNA v4 - E3 - Module 2 (100%)

2009-05-05T18:22:00.000-07:00

http://www.ccna4u.net1. Which two statements about Layer 2 Ethernet switches are true? (Choose two.) Layer 2 switches have multiple collision domains. Layer 2 switches can send traffic based on the destination MAC address.2. Which command line interface (CLI) mode allows users to configure switch parameters, such as the hostname and password? global configuration mode3. Which two statements

CCNA v4 - E3 - Module 1 (100%) => latest version

2009-05-04T02:16:00.000-07:00

http://www.ccna4u.net1. A network administrator is selecting a switch that will operate at the network core. Which three features should the switch support for optimum network performance and reliability? (Choose three.) 10 Gigabit Ethernet quality of service (QoS) hot-swappable hardware 2. Refer to the exhibit. Beginning with HR servers and workstations, a network engineer is designing a new

CONFIGURING STATIC ROUTING RIP IGRP OSPF ON CISCO ROUTER

2009-05-01T18:48:00.000-07:00

CCNA lab

2009-05-01T09:56:00.000-07:00

CCNA CertificationThe Cisco CCNA network associate certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks, including implementation and verification of connections to remote sites in a WAN. This new curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and

CCNA4 FINAL 100/100

2009-04-27T14:15:00.000-07:00

1. Refer to the exhibit. A network administrator is trying to configure a router to use SDM. After this configuration shown in the exhibit is applied, the SDM interface of the router is still not accessible. What is the cause of the problem? *The username and password are not configured correctly.The authentication method is not configured correctly.The HTTP timeout policy is not configured

Cisco ccna v4.0 practice

2009-04-27T13:59:00.000-07:00

var skin = {}; skin['FACE_SIZE'] = '32'; skin['HEIGHT'] = "260"; skin['BORDER_COLOR'] = "FFFFFF"; skin['ENDCAP_BG_COLOR'] = "transparent"; skin['ENDCAP_TEXT_COLOR'] = "333333"; skin['ENDCAP_LINK_COLOR'] = "000000"; skin['ALTERNATE_BG_COLOR'] = "transparent"; skin['CONTENT_BG_COLOR'] = "transparent"; skin['CONTENT_LINK_COLOR'] = "

CCNA v4 - E4 - Module 8 (100%)

2009-04-25T20:42:00.000-07:00

http://www.ccna4u.net 1. Excessive broadcasts are generally a symptom of a problem at which layer? data link2. Refer to the exhibit. Users at Branch B are reporting trouble accessing a corporate website running on a server that is located at HQ. HQ and Branch A users can access the website. R3 is able to ping 10.10.10.1 successfully but not 10.10.10.2. The users at Branch B can access servers at

CCNA v4 - E4 - Module 7 (100%) -> latest

2009-04-17T20:17:00.000-07:00

http://www.ccna4u.net1. Refer to the exhibit. IPv6 address 2006:1::1/64 eui-64 has been configured on the router FastEthernet0/0 interface. Which statement accurately describes the EUI-64 identifier configuration?The configuration will derive the interface portion of the IPv6 address from the MAC address of the interface.2. Refer to the exhibit. Which address or addresses represent the inside

CCNA v4 - E4 - Module 6 (100%)

2009-04-17T10:21:00.000-07:00

http://www.ccna4u.net/1. Which two Layer 1 requirements are outlined in the Data-over-Cable Service Interface Specification (DOCSIS)? (Choose two.)channel widthsmodulation techniques2. Which is an example of symmetric-key encryption?pre-shared key3. Which two statements are valid solutions for a cable ISP to reduce congestion for users? (Choose two.)allocate an additional channelsubdivide the

CCNA v4 - E4 - Module 5 (100%)

2009-04-14T23:14:00.000-07:00

http://www.ccna4u.net1. Refer to the exhibit. What will be the effect of the configuration that is shown?Users attempting to access hosts in the 192.168.30.0/24 network will be required to telnet to R3.2. Which three parameters can ACLs use to filter traffic? (Choose three.)protocol suitesource addressdestination address3. Refer to the exhibit. How does this access list process a packet with the

CCNA v4 - E4 - Module 4 (100%)

2009-04-14T05:34:00.000-07:00

http://www.ccna4u.net/1. What is the best defense for protecting a network from phishing exploits? Schedule training for all users.2. What are three characteristics of a good security policy? (Choose three.) It defines acceptable and unacceptable use of network resources. It communicates consensus and defines roles. It defines how to handle security incidents.3. The Cisco IOS image naming

NEW CCNA3 FINAL

2009-04-12T05:57:00.000-07:00

http://www.ccna4u.net1. Refer to the exhibit. An administrator documented the output of a CAM table from an Ethernet switch as shown. What action will the switch take when it receives the frame shown at the bottom of the exhibit?discard the frameforward the frame out port 2forward the frame out port 3forward the frame out all ports***forward the frame out all ports except port 3add station 00-00-

CCNA4 Chapter 7 100%

2009-04-09T10:14:00.000-07:00

CCNA4 Chapter 7 100%.rarDownload here!

CCNA v4 - E4 - Module 1 (100%)

2009-04-09T09:30:00.000-07:00

http://www.ccna4u.net 1. Which statement about WAN protocols is correct? Most WAN protocols use HDLC or a variant of HDLC as a framing mechanism.2. Which statement is true of the functionality of the layers in the hierarchical network model? The distribution layer aggregates WAN connections at the edge of the campus.3. Which WAN technology uses a fixed payload of 48 bytes and is transported

CCNA v4 - E4 - Module 3 (100%)

2009-04-06T00:33:00.000-07:00

1. Which best describes the benefit of using Frame Relay as opposed to a leased line or ISDN service? Customers only pay for the local loop and the bandwidth they purchase from the network provider.2. Which statement about Frame Relay subinterfaces is correct? Point-to-point subinterfaces act like leased lines and eliminate split-horizon routing issues.3. What best describes the use of a

CCNA v4 - E4 - Module 2 (100%)

2009-04-05T10:16:00.000-07:00

1. Refer to the exhibit. What can be concluded about the function of the Serial 0/0/0 interface on the router after the commands are entered? The serial link will be closed if the number of received packets at the destination node falls below 90 percent of the packets that are sent.2. Refer to the exhibit. While troubleshooting a serial interface, a technician enters the command show interface

CCNA v4 - E3 - Module 7 (100%)

2009-04-02T20:14:00.000-07:00

1. What will a wireless client transmit to discover the available WLAN networks? probe request2. Which function is provided by a wireless access point? converts data from 802.11 to 802.3 frame encapsulation3. Why is security so important in wireless networks? Wireless networks broadcast data over a medium that allows easy access.4. Refer to the exhibit. When configuring the wireless access

CCNA Exploration 1 - Module 2 Exam Answers Version 4.0 100%

2009-04-01T03:26:00.000-07:00

1. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)• Network• Transport• Physical• Data Link• Session2. What is a primary function of the trailer information added by the data link layer encapsulation?• supports error detection• ensures ordered arrival of data• provides delivery to correct destination• identifies the devices on the

CCNA Exploration 1 - FINAL Exam Answers Version 4.0

2009-03-29T19:40:00.000-07:00

1. Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture?• 0060.7320.D632

CCNA3 FINAL - D

2009-03-28T02:46:00.000-07:00

1 Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. The administrator applies the additional configuration shown in the exhibit to Switch1. However, the telnet from HostA fails. What additional commands

CCNA 3 final test

2009-03-25T08:36:00.000-07:00

1Refer to the graphic. Which of the following commands would be used on the router to provide communication between the two hosts connected to the switch?interface vlan 2ip address 192.168.2.1 255.255.255.0no shutdowninterface vlan 3ip address 192.168.3.1 255.255.255.0no shutdown*** interface fastethernet 0/0no shutdowninterface fastethernet 0/0.2encapsulation dot1q 2ip address 192.168.2.1

ccna 2 final new version!

2009-03-24T21:23:00.000-07:00

The router is tested for potential security problems and any necessary changes

CCNA 640-802 WAN Practice Questions

2009-03-04T22:16:00.000-08:00

Brief: CCNA exam requires a good understanding of WAN concepts, terminology, and implementation using Cisco routers. We have given a few multiple choice questions to gauge your preparedness (yourself) of the subject before taking the exam!Q1: Cisco IOS supports MPPC (Microsoft Point-to-Point Compression algorithm) on one of the following encapsulation types. Choose the correct one. A.

CCNA 640-802 VLAN / VTP Practice Questions

2009-03-02T03:51:00.000-08:00

1.Brief: CCNA exam requires a good understanding of VLAN / VTP concepts, terminology, and implementation using Cisco switches. We have given a few multiple choice questions to gauge your preparedness (yourself) of the subject before taking the exam!Q1: Match the trunking protocols with respective media: 1. Inter Switch Link A. FDDI 2. LANE B. Fast Ethernet 3.

TCP/IP and the OSI Reference Model

2009-02-26T19:37:00.000-08:00

As illustrated in Figure 1.2, the TCP/IP model consists of four layers, each of which can have several sublayers. These layers correlate roughly to layers in the OSI reference model and define similar functions. Some of the TCP/IP layers correspond directly with layers in the OSI reference model while other span several OSI layers. The four TCP/IP layers are:...• The TCP/IP Application Layer

CCNA Practice Tests 3.1.0

2009-02-26T05:38:00.000-08:00

Publisher's Description:CCNA Practice Tests - About CCNA - Cisco Certified Network Associate certification is awarded by Cisco(R) Systems on successful completion of CCNA (Exam code: 640-607) exam. CCNA is a foundation level certification offered by Cisco(R). The exam objectives include TCP/IP fundamentals, OSI model, networking fundamentals like Ethernet, Token Ring, FDDI;Cisco IOS fundamentals,

Ebook.CCNA Security Official Exam Certification Guide Exam 640-553 Exam Certifica.1587202204

2009-02-25T10:01:00.000-08:00

Ebook.CCNA Security Official Exam Certification Guide Exam 640-553 Exam Certifica.1587202204Download now

CCNA 4 - Final Exam Answers

2009-02-20T02:11:00.000-08:00

1Which of the following describes the roles of devices in a WAN? (Choose three.)*** A CSU/DSU terminates a digital local loop.A modem terminates a digital local loop.A CSU/DSU terminates an analog local loop.*** A modem terminates an analog local loop.*** A router is commonly considered a DTE device.A router is commonly considered a DCE device.www.p4s-ccna.blogspot.com2What value in the address

CCNA 2 v4.0 Final Exam Answers

2009-02-17T22:08:00.000-08:00

Download CCNA 2 v4.0 Final Exam Answers

Cisco Press ICND1 2nd Edition Jan 2008

2009-02-16T18:06:00.000-08:00

Contents at a GlanceForeword xxiiIntroduction xxiiiChapter 1 Building a Simple Network 3Chapter 2 Ethernet LANs 139Chapter 3 Wireless LANs 207Chapter 4 LAN Connections 237Chapter 5 WAN Connections 345Chapter 6 Network Environment Management 425Appendix Answers to Chapter Review Questions 465Index 480Download Cisco Press ICND1 2nd Edition Jan 2008 part1Download Cisco Press ICND1 2nd Edition Jan

CCNA1 FINAL 100% (Updated Jan 14 - 2009)

2009-02-09T19:08:00.000-08:00

1 A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?Use the ipconfig /all command at the host�s command prompt.----> Use the ping 127.0.0.1 command at the command prompt.Use the traceroute command at the command prompt

CCNA Practice Exam - Cisco Certified Network Associate 640-802

2009-02-09T07:41:00.000-08:00

About CCNA™ certification: CCNA - Cisco Certified Network Associate is an entry level certification and the most popular Cisco certification. Getting CCNA certified ensures that the candidate has enough knowledge to plan, configure, and operate simple routed WAN and switched LAN networks using Cisco products. CCNP - Cisco Certified Networking Professional is

CONFIGURING STATIC ROUTING RIP IGRP OSPF ON CISCO ROUTER

2009-02-07T01:22:00.000-08:00

IP adress

2009-02-03T22:46:00.000-08:00

Subnetting in 6 easy steps - part 1

2009-02-03T22:43:00.000-08:00

Cisco Training CCNA IP Addressing - Part 1 of 5

2009-02-03T22:41:00.000-08:00

CCNA WAN Questions

2009-01-14T19:13:00.000-08:00

Here you will find answers to WAN Questions Question 1: The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command?A: This command should be executed from the global configuration mode.B: The IP address 10.121.16.8 is the local router port used to forward data.C: 102 is the remote DLCI that will receive

CCNA2 FINAL2 (new 25/12/08)

2009-01-14T06:38:00.000-08:00

1. Refer to the exhibit. The output of the show ip route command for three routers on a network is displayed. All routers are operational, pings are not blocked on this network, and no default routes are installed. Which two pings will fail? (Choose two.)from R1 to 172.16.1.1** from R1 to 192.168.3.1from R2 to 192.168.1.1from R2 to 192.168.3.1** from R3 to 192.168.1.1172.16.4.0/242. A router that

CCNA Practice Certification Exam # 1 - CCNA Exploration: Accessing the WAN (Version 4.0)

2009-01-10T07:17:00.000-08:00

1. What are three examples of TCP/IP application layer protocols? (Choose three.) a terminal emulation protocol that supports remote console connections with various network devices a protocol created by IBM that makes it easier for mainframes to connect to remote offices a protocol responsible for transporting electronic mail on TCP/IP networks and the

CCNA Practice Certification Exam 2

2009-01-09T09:11:00.000-08:00

CCNA Practice Certification Exam # 2- CCNA Exploration: Accessing the WAN (Version 4.0) 1. Refer to the exhibit. The exhibit shows simplified protocol data units from different OSI model layers. Which three statements are true about the PDUs and the encapsulation process? (Choose three.) PDU #1 is a frame. PDU #2 is an application layer PDU PDU #3 is a

CCNA3 – Answers chapter 4 v.4.0 (100/100)

2009-01-08T08:46:00.001-08:00

1. Which statement is true when VTP is configured on a switched network that incorporates VLANs? VTP is only compatible with the 802.1Q standard. VTP adds to the complexity of managing a switched network. VTP allows a switch to be configured to belong to more than one VTP domain. VTP dynamically communicates

CCNA3 – Answers chapter 4 v.4.0 (100/100)

2009-01-08T08:46:00.000-08:00

GNS3-Topology: CCNA & CCNP Full Mesh Topology Template

2009-01-07T09:44:00.000-08:00

Chris sent me a lab which he says has helped him to work on about 95% of his CCNA and CCNP lab requirements. I think this is a clear sign that using Dynamips or GNS3 can be effective in a big way with exam preperation. That 5% left over can be achieved in a few ways - rack space, friends with labs or purchasing switches on ebay and link them into the virtual topology using real interfaces.

CCNA - Hotspot Questions

2009-01-05T20:51:00.000-08:00

Hotspot Routing Question Question 1: If the router R1 has a packet with a destination address 192.168.1.255, what describes the operation of the network? A - R1 will forward the packet out all interfacesB - R1 will drop this packet because it is not a valid IP addressC - As R1 forwards the frame containing this packet, Sw-A will add 192.168.1.255 to its MAC tableD - R1 will encapsulate the

CCNA Drag and Drop Questions

2009-01-05T08:12:00.000-08:00

Question 1:A dental firm is redesigning the network that connects its three locations. The administrator gave the networking team 192.168.164.0 to use for addressing the entire netwok. After subnetting the address, the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, you must

CCNA Implementation SIM

2009-01-05T08:09:00.000-08:00

(Updated from real CCNA exam on 12-20-2008) This topology contains 3 routers and 1 switch. Complete the topology.Drag the appropriate device icons to the labeled DeviceDrag the appropriate connections to the locations labeled Connections.Drag the appropriate IP addresses to the locations labeled IP address (Hint: use the given host addresses and Main router information)To remove a device or

CCNA Troubleshooting Questions 2

2009-01-05T07:31:00.000-08:00

Question 1:A network administrator is troubleshooting the OSPF configuration of routers R1 and R2. The routers cannot establish an adjacency relationship on their common Ethernet link. The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2. Based on the information in the graphic, what is the cause of this problem?A. The OSPF area is not configured properly.B.

CCNA Troubleshooting Questions 1

2009-01-05T07:23:00.000-08:00

Question 1:Refer to the exhibit. The network administrator is in a campus building distant from Building B. WANRouter is hosting a newly installed WAN link on interface S0/0. The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface. How can the administrator accurately verify the correct cable type on S0/0 in the most

CCNA 2 - Final Exam (A)

2009-01-02T03:35:00.000-08:00

1. Refer to the exhibit. The network administrator issues the command no ip classless on Router1. What forwarding action will take place on a packet that is received by Router1 and is destined for host 192.168.0.26?• The packet will be dropped• The packet will be forwarded to the gateway of last resort.• The packet will match the 192.168.0.0 network and be forwarded out Serial 0/0.• The packet

CCNA 2 - Final Exam (B)

2009-01-02T03:34:00.000-08:00

1. Refer to the exhibit. The output of the show ip route command for three routers on a network is displayed. All routers are operational, pings are not blocked on this network, and no default routes are installed. Which two pings will fail? (Choose two.)• from R1 to 172.16.1.1• from R1 to 192.168.3.1• from R2 to 192.168.1.1• from R2 to 192.168.3.1• from R3 to 192.168.1.12. A router that uses the

CCNA 2 - Final Exam (C)

2009-01-02T03:33:00.000-08:00

1. Refer to the exhibit. A new PC was deployed in the Sales network. It was given the host address of 192.168.10.31 with a default gateway of 192.168.10.17. The PC is not communicating with the network properly. What is the cause?• The address is in the wrong subnet.• 192.168.10.31 is the broadcast address for this subnet.• The default gateway is incorrect.• The host address and default gateway

CCNA 3 - Final Exam

2009-01-02T03:24:00.000-08:00

1. Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. Theshow ip interface brief is issued on Router1 and the show interfaces trunk command is issued on theSwitch1 to verify the current status. The administrator applies the additional configuration shown in theexhibit to Switch1. However, the telnet from HostA fails. What additional commands need

CCNA 4 - Final Exam (A)

2009-01-02T03:13:00.000-08:00

1. A network administrator is asked to design a system to allow simultaneous access to the Internet for 250 users. The ISP for this network can only supply five public IPs. What can be used to accomplish this task?• routable translation• dynamic translation• static translation• port address translation2. The LAN attached to the Ethernet interface of the Raleigh router shown in the graphic is

CCNA 4 - Final Exam (B)

2009-01-02T03:12:00.000-08:00

1. Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.)• improper placement of enterprise level servers• addition of hosts to a physical segment• replacement of hubs with workgroup switches• increasing use of bandwidth intensive network applications• migration to full-duplex Ethernet within the LAN2. Which of the following are examples of TCP/IP application layer

CCNA 4 - Final Exam (C)

2009-01-02T01:50:00.000-08:00

1. Which of the following describes the roles of devices in a WAN? (Choose three.)• A CSU/DSU terminates a digital local loop.• A modem terminates a digital local loop.• A CSU/DSU terminates an analog local loop.• A modem terminates an analog local loop.• A router is commonly considered a DTE device.• A router is commonly considered a DCE device.2. What value in the address field of a Frame Relay

CCNA Lab: Copy to TFTP Server

2008-12-22T10:27:00.000-08:00

Items of practical training certificates Cisco CCNA: Copy to TFTP ServerStart practicing: Link here

CCNA Lab: RIP Routing

2008-12-22T06:57:00.000-08:00

Items of practical training certificates Cisco CCNA: RIP RoutingStart practicing: RIP Routing

CCNA Lab: IGRP Routing

2008-12-22T06:53:00.000-08:00

Items of practical training certificates Cisco CCNA: IGRP RoutingStart practicing: Link here

CCNA Lab: Initial Switch Configuration

2008-12-22T04:43:00.000-08:00

Items of practical training certificates Cisco CCNA: Initial Switch ConfigurationStart practicing: Initial Switch Configuration

CCNP_BCMSN Lab: Configuring a Distribution Switch

2008-12-22T04:34:00.000-08:00

Items of practical training certificates Cisco CCNP_BCMSN (Building Cisco Multilayer Switched Networks)Start practicing: Configuring a Distribution Switch

CCNA EIGRP LAB Question

2008-12-20T00:58:00.000-08:00

Question:After adding R3 router, no routing updates are being exchanged between R3 and the new location. All other inter connectivity and Internet access for the existing locations of the company are working properly.The task is to identify the fault(s) and correct the router configuration to provide full connectivity between the routers.Access to the router CLI can be gained by clicking on the

CCNA: Cisco Certified Network Associate: Fast Pass

2008-12-20T00:25:00.000-08:00

Organized by exam objectives, this is a focused, concise review guide that works hand-in-hand with any learning tool, including the Sybex CCNA: Cisco Certified Network Associate Study Guide, 6th and Deluxe editions.The book will consist of four high-level chapters, each mapping to the four main Domains of the exam skill-set. The book will drill down into the specifics of the exam, covering the

Cisco IOS access lists: 10 things you should know

2008-12-19T23:54:00.000-08:00

Takeaway: Access control lists (ACLs) are a fundamental part of working with routers. How much do you know about managing these vital gatekeepers? David Davis lists 10 things every administrator should know about working with Cisco IOS ACLs.People who read this, also read...Playing with Cisco access listsUse advanced parameters on your Cisco IOS ACLsTraffic filtering with Cisco access lists: Why,

Cisco Network Magic Pro 5.0.8282

2008-12-19T23:48:00.000-08:00

Cisco has introduced a suite of network management software named Network Magic 5.0 . This tool will improve various network tasks like- connecting and sharing computers(content & printer), control computers on network while accessing Internet, connection repairing features, manage performance problem to provide optimize performance and many more. This tool run in the background and

CCNA 1 Final Exam 640 - 802

2008-12-19T06:28:00.000-08:00

This Test is 85% Correct1. A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?--> Use the ping 127.0.0.1 command at the command prompt.2. Refer to the exhibit. Which set of devices contains only intermediary devices?-->

CCNA1 FINAL 100%

2008-12-18T00:58:00.000-08:00

Update today 1 A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?Use the ipconfig /all command at the host�s command prompt.X Use the ping 127.0.0.1 command at the command prompt.Use the traceroute command at the

Lab 2, Modelling the CCNA Topology

2008-12-18T00:48:00.000-08:00

This lab will teach you how to model the CCNA lab topology in a WAN scale. Skills Required This lab assumes that you have already completed lab 1. The CCNA Lab Topology This is the topology used in the CCNA practical labs. Study the diagram to

PacketTrap Ping Scan 1.1.3301

2008-12-18T00:44:00.000-08:00

PacketTrap Ping Scan is a FREE utility that sends ICMP ECHO requests across a network and rapidly builds a spreadsheet of responding nodes. DNS lookup information may optionally be provided by Ping Scan for each responding address. Follow the link and free download PacketTrap Ping Scan now. Download link 1: Download now Download link 2: Download now

CCNA4 Module 7(90,5%)

2008-12-10T08:09:00.000-08:00

1Why is it important to record baseline measurements of a prototype network?Test results show security weaknesses after the baseline tests are run.The baseline is the point at which the network is operating at its fullest potential.Baseline measurements define a point at which network traffic has exceeded the designed capabilities of the network.Test results are compared to the baseline to see

CCNA4 Module 9 (77%)

2008-12-10T08:04:00.000-08:00

CCNA Discovery 4 Module 9 Scored 77%1Upon completion of a proposal, a network design team must sell their ideas to two key stakeholders. Who are these two stakeholders? (Choose two.)Customers***licensing boardscabling contractors***internal managementproject implementation team2NetworkingCompany completes the installation of a network upgrade for a retail customer. All of the onsite tests

CCNA 3:Module 1

2008-12-10T08:00:00.000-08:00

Options With Highlight Colours are Correct Answer 1. A network technician is asked to examine an existing switched network. Following this examination, the technician makes recommendations for adding new switches where needed and replacing existing equipment that hampers performance. The technician is given a budget and asked to proceed. Which two pieces of information would be helpful in

CCNA 3:Module 2

2008-12-10T07:58:00.000-08:00

Options With Highlight Colours are Correct Answer1. When a switch receives a frame and the source MAC address is not found in the switching table, what action will be taken by the switch to process the incoming frame?The switch will request that the sending node resend the frame.The switch will issue an ARP request to confirm that the source exists.The switch will map the source MAC address to

CCNA 3:Module 3

2008-12-10T07:57:00.000-08:00

Options With Highlight Colours are Correct Answer1. What statement about the 802.1q trunking protocol is true?802.1q is Cisco proprietary.802.1q frames are mapped to VLANs by MAC address.802.1q does NOT require the FCS of the original frame to be recalculated.802.1q will not perform operations on frames that are forwarded out access ports.2. Which two statements describe the benefits of VLANs? (

CCNA 3:Module 4

2008-12-10T07:54:00.000-08:00

Options With Highlight Colours are Correct Answer1. Refer to the exhibit. The switches in the exhibit are connected with trunks within the same VTP management domain. Each switch is labeled with its VTP mode. A new VLAN is added to Switch3. This VLAN does not show up on the other switches. What is the reason for this?VLANs cannot be created on transparent mode switches.Transparent mode switches

CCNA 3:Module 5

2008-12-10T07:51:00.000-08:00

Options With Highlight Colours are Correct Answer1. Which two statements are true about the default operation of STP in a Layer 2 switched environment that has redundant connections between switches? (Choose two.)The root switch is the switch with the highest speed ports.Decisions on which port to block when two ports have equal cost depend on the port priority and identity.All trunking ports are

CCNA 3:Module 6

2008-12-10T07:49:00.000-08:00

Options With Highlight Colours are Correct Answer1. Refer to the exhibit. Which three statements describe the network design shown in the exhibit? (Choose three.)This design will not scale easily.The router merges the VLANs into a single broadcast domain.This design uses more switch and router ports than are necessary.This design exceeds the maximum number of VLANs that can be attached to a